◆ Nanoscale particle size with narrow distribution.
◆ Good compatibility with pigments and coating additives.
◆ Coating costs reduced in combination with SBR.
◆ Excellent chemical and mechanical stability, good binding strength.
◆ Formaldehyde-free, anti-freezing.
Appearance：light yellow to yellow transparent liquid
Solid Content：50.0±2.0%
Density：1.20-1.30 g/cm3
Viscosity：100-500 mPa.s
pH：5.0-8.0
Dispersibility in water：Dispersible
Charge：Anionic
Copolymer of modified gelatin and biomass materials
◆ Applying dosage: Equivalent substitution for 30-50 % SBR in Coating recipe.
◆ Performance of paper improved significantly in conjunction with water repellent agent.
◆ Adding process is the same as SBR.
◆ Avoided mixing with strong cationic substances.
Optimal dosage and adding points will be recommended by Technical Service based on the coating system to ensure optimal performance of your system.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
NCC? SW-3150 should be applied in coating recipe by appropriate protective equipment (See Section 8 in MSDS).
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 1000kg/ IBC (1000L), tank truck.
◆ Better performance of printabilities, such as wet-rub, IGT, dry strength and wet strength, ink absorption ,etc.
◆ Formaldehyde-free, ammonia-free.
◆ Crosslink rapidly, good water resistance without curling.
Appearance: Colorless to yellow transparent liquid
Solid Content: 98.0±2.0%
Density: 1.17-1.27 g/cm3 (20℃)
Viscosity: ≤500 mPa.s (25℃)
Solubility in water: Insoluble
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Multi-active functional group material
◆ Applying dosage: 0.1%-0.6% based on pigments weight.
◆ Usually applied in the last step of coating mixed process.
您的客服代表會依據涂料體系來建議最理想的添加量及加入點，以確保您的系統達到最佳性能。
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 250kg/drum, 1250kg/ IBC (1000L).
◆ Better performance of water resistance, wet-rub, dry and wet strength due to its strong cross-linking.
◆ Weak cationic ions make coating flocculate slightly, accelerate the curing of coating, reduce the migration of binders, give the coating porosity and bulk, so as to improve the optical and printing properties of coated paper, such as ink absorption, wet repellence, blister resistance and printing speckle.
◆ Crosslink rapidly, good water resistance off-machine.
Appearance：Colorless to yellow transparent liquid
Solid Content：60.0±2.0 % (105℃, 4h)
Viscosity：≤200 mPa.s (25℃)
pH：5.0-8.0（25℃）
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Modified Polyamide Resin
◆ Added in the last process of coating preparation under dispersing.
◆ Applying dosage: 0.1-0.6% based on pigments weight.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Better lubricant performance at 30-200℃ with small dosage.
◆ Better runnability, suitable for high speed coating color system, especially.
◆ Contributed to paper’s smoothness and gloss
◆ Enhance anti-dust performance after super calendar or soft calendar.
◆ Extend the blade life.
◆ Helpful for even dwell during printing.
Appearance：Milky aqueous dispersion
Solid Content：50.0±2.0 % (105℃, 2h)
Density：1.10-1.20 g/cm3 (20℃)
Viscosity：50-400 mPa.s (25℃)
pH：8.0-12.0（25℃）
Dispersibility in water：Dispersible
Charge：Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Modified stearate
◆ Applying dosage: 0.6-1.5% based on pigments weight.
◆ Added in the last process of coating preparation under dispersing.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Better lubricant performance at 30-200℃ with small dosage.
◆ Better runnability, suitable for high speed coating color system, especially.
◆ Less scratches than Calcium stearate system.
◆ Contributed to paper’s smoothness and gloss
◆ Better anti-dust performance after super calendar or soft calendar.
◆ Prolong blade life.
◆ Helpful for even dwell during printing.
Appearance：Colorless to pale yellow liquid
Solid Content：25.0±2.0 %
Viscosity：≤300 mPa.s (25℃)
pH：7.0-10.0（25℃）
Solubility in water：Soluble
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Modified oxide polyethylene
◆ Applying dosage: 0.2-0.6% based on pigments weight.
◆ Usually applied in the last step of coating mixed process.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Can be used for all kinds of pigment dispersion system, specially suitable for grinded calcium carbonate dispersion.
◆ Made high solid content pigment slurry of low viscosity by adding a small dosage.
◆ The slurry has lower viscosity and better stability, not easy to thicken.
Appearance：Light yellow to yellow liquid
Odor ：None
Solid Content：40.0±2.0 %
Viscosity：＜300 mPa.s (25℃)
pH：4.0-7.0（25℃）
Density：1.10-1.30 g/cm3 (20℃)
Solubility in water：Soluble
Charge：Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS).
Acrylic copolymer, 40% aqueous phase liquid
◆ Applying dosage: 0.2%-0.8% (as solid) based on pigments weight for pre-disperse of pigment grinding.
◆ 0.15%-0.4% (as solid) based on pigments weight for pigment grinding.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Wear appropriate personal protective equipment when adding NCC? PAC-1240 to paint (see section 8 of MSDS for details).
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 250kg/drum, 1250kg/ IBC (1000L).
◆ Good water solubility, easy to operate, can be added in any process.
◆ Low dosage, rapid efficacy, and prolonged antimicrobial action.
◆ Rapidly resolves microbial issues under alkaline conditions.
◆ Functions as a preservative for additives and coatings.
◆ Non-foaming.
Appearance：Colorless to yellowish-green transparent liquid
pH: 1.5-5.5
Density: 1.00-1.28 g/cm3
Dispensability in water: Dispersible
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Applying dosage: For microbial control, dosage should be adjusted based on microbial/algal growth levels. It is generally used in paper and paperboard production, with an addition amount of 10-60 ppm.
To achieve optimal efficacy, the product should be added to the well-mixed pulp or water. Both continuous and intermittent addition methods can be used. The frequency and amount of addition should be determined according to the specific conditions of the system.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Avoid direct contact with eyes: once in contact, rinse with plenty of water immediately without delay. Do not come into contact with skin for long periods of time.
Do not contact with reducing metals, such as metallic iron, aluminum, etc., during storage, so as not to cause product decomposition. Pipelines made of PP or PE can be used.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid direct sunlight.
Shelf life is 12 months in sealed (at room temperature). Container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Good water solubility, easy to operate, can be added in any process.
◆ Low dosage, rapid efficacy, and prolonged antimicrobial action.
◆ Rapidly resolves microbial issues under alkaline conditions.
◆ Functions as a preservative for additives and coatings.
◆ Non-foaming.
Appearance：Colorless to yellowish-green transparent liquid
pH: 1.5-5.5
Density: 1.00-1.28 g/cm3
Dispensability in water: Dispersible
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ Applying dosage: For microbial control, dosage should be adjusted based on microbial/algal growth levels. It is generally used in paper and paperboard production, with an addition amount of 10-60 ppm.
To achieve optimal efficacy, the product should be added to the well-mixed pulp or water. Both continuous and intermittent addition methods can be used. The frequency and amount of addition should be determined according to the specific conditions of the system.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Avoid direct contact with eyes: once in contact, rinse with plenty of water immediately without delay. Do not come into contact with skin for long periods of time.
It is compatible with dosing equipment made of most plastics, including PVC, polypropylene, nylon-11, and PTFE. However, SS316 stainless steel used for connection parts will quickly corrode. Do not contact with reducing metals, such as metallic iron, aluminum, etc., during storage, so as not to cause product decomposition. Pipelines made of PP or PE can be used.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid direct sunlight.
Shelf life is 12 months in sealed (at room temperature). Container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Extremely high light fastness, anti-penetration efficiency and weather resistance, good chemical compatibility.
◆ High strength, and low usage.
◆ Enhances visual whiteness and improves paper/coating hue when used with FWAs.
Appearance：Bluish-black liquid
Solid Content：21.5-24.5%
Viscosity：< 250 mPa.s (25℃)
pH：5.0-9.0
Charge: Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ The pigments should be thoroughly mixed before use.
◆ To prevent flocculation, dilute in two steps (First step: pre-dilute at a ratio of 1:2 or 1:3; Second step: further dilute to the required ratio based on production needs). To avoid precipitation, use soft water or at least fresh water. Diluted product should be used up within 24 hours. The pigments that have been diluted also need to be thoroughly mixed before use.
◆ For pulp fiber whitening, the original liquid can be directly added.
◆ Do not mix with cationic products during dilution (to prevent precipitation).
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Stored in a cool ventilated dry warehouse with temperature of 5-30℃, and avoid freezing (which can cause excessive flocculation and affect performance) and direct high-temperature sunlight exposure.
Shelf life is 12 months in sealed, container should be closed when not in use.
Packing: 30kg/PE drum, 1000kg/ IBC (1000L).
◆ The addition process is simple and easy to operate.
◆ Effectively improve the hydrophobicity and film-forming property of biolatex.
◆ Improve the bonding performance of biolatex.
◆ Contributed to paper’s dry and wet strength.
◆ Enhance the anti-crack performance of coating.
Appearance：Colorless to yellow liquid
Odor：None
含固量： 50.0±2.0%
Solid Content：50.0±2.0 %
Solid Content：50.0±2.0 %
pH：5.0-8.0（25℃）
Dispersibility in water：Dispersible
Modified polymer, 50% aqueous dispersion
◆ Applying dosage: 10-20% based on starch.
◆ Added in the last process of biolatex preparation process.
Your customer service representative will provide technical services including product screening and factory site commissioning to ensure your system achieves optimum performance.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Narrow molecular weight distribution, suitable for the dispersion of clay, CaCO3, TiO2, Al(OH)3, PCC, ect.
◆ Made high solid content coating with low viscosity by adding a small dosage.
Appearance：Colorless to pale yellow viscous liquid
Odor：None
Solid Content：40.0±2.0%
Density：1.20-1.30 g/cm3 (20℃)
Viscosity：＜300 mPa.s (25℃)
pH：6.0-8.0（25℃）
Solubility in water：Soluble
Charge：Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS).
Acrylic copolymer; about 40% aqueous phase liquid.
◆ Applying dosage: 0.1%-0.4% (as solid) based on pigments weight.
◆ Dilution 1-4 times before applying, and applied under stirring.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Improve water retention of coating.
◆ Reduce the viscosity of coating to get better rheological behavior and a higher solid coating, increasing coating speed, saving energy.
◆ Improve paper properties (gloss, smoothness, ink absorption & print gloss e. g.).
Appearance：Yellow to amber liquid
Solid Content：40.0±2.0%
Density：1.20-1.30 g/cm3 (20℃)
Viscosity：＜300 mPa.s (25℃)
pH：5.0-7.0
Solubility in water：Soluble
Charge：Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Modified acrylic copolymer; about 40% aqueous phase liquid.
◆ Applying dosage: 0.1%-0.5% (as solid) based on pigments weight.
◆ Add before the adhesive, preferably at high
speed
Optimal dosage and adding points will be recommended by Technical Service based on the coating system to ensure optimal performance of your system.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
NCC? RA-6640 should be applied in coating recipe by appropriate protective equipment (See Section 8 in MSDS).
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 250kg/drum, 1250kg/ IBC (1000L).
◆ Extremely high light fastness, anti-penetration efficiency and weather resistance, good chemical compatibility.
◆ High strength, and low usage.
◆ Enhances visual whiteness and improves paper/coating hue when used with FWAs.
Appearance：Bluish-black liquid
Solid Content：50.0±1.0 %
Viscosity：< 300 mPa.s (25℃)
pH：6.0-10.0
Charge: Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ The pigments should be thoroughly mixed before use.
◆ To prevent flocculation, dilute in two steps (First step: pre-dilute at a ratio of 1:2 or 1:3; Second step: further dilute to the required ratio based on production needs). To avoid precipitation, use soft water or at least fresh water. Diluted product should be used up within 24 hours. The pigments that have been diluted also need to be thoroughly mixed before use.
◆ For pulp fiber whitening, the original liquid can be directly added.
◆ Do not mix with cationic products during dilution (to prevent precipitation).
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product
Stored in a cool ventilated dry warehouse with temperature of 5-30℃, and avoid freezing (which can cause excessive flocculation and affect performance) and direct high-temperature sunlight exposure.
Shelf life is 12 months in sealed, container should be closed when not in use.
Packing: 30kg/PE drum, 1000kg/ IBC (1000L).
◆ Better performance of printabilities, such as IGT, dry strength, wet strength, ink absorption ,etc.
◆ Formaldehyde-free, odour free, green and environmental friendly.
◆ Crosslink rapidly, good water resistance without curling, suitable for coating recipe with starch adhesive.
Appearance：Colorless or slightly white liquid
Solid Content：≥43.0 %
Viscosity：≤50 mPa.s (25℃)
pH：9.0-12.0（25℃）
Dispensability in water: Dispersible
Charge：Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Modified potassium zirconium carbonate
◆ Applying dosage: 0.1-0.3% based on pigments weight.
◆ Added in the final process of coating preparation under dispersing.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 1000kg or 1250kg / IBC (1000L).
◆ Can be used for all kinds of pigment dispersion system, specially suitable for grinded calcium carbonate dispersion.
◆ Made high solid content pigment slurry of low viscosity by adding a small dosage.
◆ The slurry has lower viscosity and better stability, not easy to thicken.
Appearance：Colorless to pale yellow viscous liquid
Odor：None
Solid Content：40.0±2.0 %
pH：6.0-8.0（25℃）
Viscosity：＜300 mPa.s (25℃)
Density：1.25-1.35 g/cm3 (20℃)
Solubility in water：Soluble
Charge：Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS).
Acrylic copolymer, 40% aqueous phase liquid.
◆ Applying dosage: 0.16-0.3% (as solid) based on pigments weight for pre-disperse of pigment grinding.
◆ 0.2-0.7% (as solid) based on pigments weight for pigment grinding.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Wear appropriate personal protective equipment when adding NCC? PA-6140 to paint (see section 8 of MSDS for details).
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 250kg/drum, 1250kg/ IBC (1000L).
◆ Give high solid coating good thixotropy, leveling, improve the high shear performance of high-speed paper machine.
◆ Improve coating water retention performance, and can effectively reduce adhesive migration in coating.
◆ Prolong blade life, increase the speed of paper machine, improve the quality of coated paper.
Appearance：Milky aqueous dispersion
Solid Content：30.0±2.0 %
pH：2.0-5.0（25℃）
Viscosity：＜100 mPa.s (25℃)
Density：1.00-1.10 g/cm3 (20℃)
Dispersibility in water：Dispersible
Charge：Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Acrylates Copolymer, 30% aqueous dispersion
◆ Applying dosage: 0.10-0.30% based on pigments weight.
◆ Applying point: Added in the final process of coating preparation (pH=8.0-11.0) under dispersing.
◆ Dilution 1-2 times before adding, and slowly added to the coating system until the desired viscosity achieved.
◆ Dosage varies with different purposes, an optimum addition should be determined through small trial before use.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Excellent defoaming effect.
◆ Suitable for a wide pH and temperature range.
◆ FDA-approved.
Appearance: White to yellow liquid
pH value: 5.5-8.5
Density: 0.90-1.05 g/cm3 (25℃)
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Alkoxylated fatty alcohols
◆ Dosage：Varies depending on foam generation levels and actual production conditions. Typical dosage range: 50-1000 g per ton of paper.
◆ The product can be used directly or after dilution with clean water. It should be added at appropriate locations with good agitation. For optimal performance, continuous addition is recommended.
◆ Technical Support：Our customer service representatives will provide specific suggestions and optimized dosages based on actual conditions to meet application requirements.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Wear appropriate personal protective equipment when adding NCC 3618 (see section 8 of MSDS for details).
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Good water solubility, easy to operate, can be added in any process.
◆ Low dosage, rapid efficacy, and prolonged antimicrobial action.
◆ Rapidly resolves microbial issues under alkaline conditions.
◆ Functions as a preservative for additives and coatings.
◆ Non-foaming.
Appearance：Colorless to yellowish-green transparent liquid
pH: 1.5-5.5
Density: 1.00-1.28 g/cm3
Dispensability in water: Dispersible
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Applying dosage: For microbial control, dosage should be adjusted based on microbial/algal growth levels. It is generally used in paper and paperboard production, with an addition amount of 10-60 ppm.
To achieve optimal efficacy, the product should be added to the well-mixed pulp or water. Both continuous and intermittent addition methods can be used. The frequency and amount of addition should be determined according to the specific conditions of the system.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Avoid direct contact with eyes: once in contact, rinse with plenty of water immediately without delay. Do not come into contact with skin for long periods of time.
Do not contact with reducing metals, such as metallic iron, aluminum, etc., during storage, so as not to cause product decomposition. Pipelines made of PP or PE can be used.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid direct sunlight.
Shelf life is 12 months in sealed (at room temperature). Container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Good water solubility, easy to operate, can be added in any process.
◆ Low dosage, rapid efficacy, and prolonged antimicrobial action.
◆ Rapidly resolves microbial issues under alkaline conditions.
◆ Functions as a preservative for additives and coatings.
◆ Non-foaming.
Appearance：Colorless to yellowish-green transparent liquid
pH: 1.5-5.5
Density: 1.00-1.28 g/cm3
Dispensability in water: Dispersible
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ Applying dosage: For microbial control, dosage should be adjusted based on microbial/algal growth levels. It is generally used in paper and paperboard production, with an addition amount of 10-60 ppm.
To achieve optimal efficacy, the product should be added to the well-mixed pulp or water. Both continuous and intermittent addition methods can be used. The frequency and amount of addition should be determined according to the specific conditions of the system.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Avoid direct contact with eyes: once in contact, rinse with plenty of water immediately without delay. Do not come into contact with skin for long periods of time.
It is compatible with dosing equipment made of most plastics, including PVC, polypropylene, nylon-11, and PTFE. However, SS316 stainless steel used for connection parts will quickly corrode. Do not contact with reducing metals, such as metallic iron, aluminum, etc., during storage, so as not to cause product decomposition. Pipelines made of PP or PE can be used.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid direct sunlight.
Shelf life is 12 months in sealed (at room temperature). Container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Formaldehyde-free, can be used in decorative paper, filter paper, fruit cultivating bag paper, Coated Art paper and cup base paper .
◆ Increase the wet strength and dry strength of the paper.
◆ Broken paper and waste paper are easy to recycle.
◆ It also serves as a retention agent for fillers and sizing agents in the papermaking process.
◆ It can give the paper more excellent performance at the same time.
Appearance: Colorless to brown liquid
Odor: None
Solid Content: 12.5±0.5%
Viscosity：≤150 mPa.s (25℃)
pH：2.0-5.0（25℃）
Solubility in water：Soluble
Charge: Cationic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Polyamide polyamine epichlorohydrin resin (PAE), 12.5% aqueous solution
◆ Applying dosage: 5-50kg per ton of paper， can be used in combination with rosin size and aluminum sulfate.
◆ It should be diluted to less than 5% with water at room temperature before use.
◆ Addition point: Close to the headbox to avoid excessive shear.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 3 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Formaldehyde-free, can be used in decorative paper, filter paper, fruit cultivating bag paper, Coated Art paper and cup base paper .
◆ It can not only increase the wet strength of the paper, but also significantly improve the dry strength.
◆ Broken paper and waste paper are easy to recycle.
◆ It also serves as a retention agent for fillers and sizing agents in the papermaking process.
◆ It can give the paper more excellent performance at the same time.
Appearance: Colorless to reddish-brown liquid
Odor: None
Solid Content: 25.0±1.0%
Viscosity：≤500 mPa.s (25℃)
pH：1.5-4.0（25℃）
Solubility in water：Soluble
Charge: Cationic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Polyamide polyamine epichlorohydrin resin (PAE), 25% aqueous solution
◆ Applying dosage: 3-30kg per ton of paper， can be used in combination with rosin size and aluminum sulfate.
◆ It should be diluted to less than 5% with water at room temperature before use.
◆ Addition point: Close to the headbox to avoid excessive shear.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 3 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ The product has a high branched chain structure, low viscosity, high molecular weight, excellent self-retention and retention effect , less foam.
◆ Significantly improve the internal-bonding strength, ring-crush compression resistance, bursting, stiffness, folding resistance, tensile strength, breaking length and other properties of paper.
◆ ◆ Increase retention of fines or mineral fillers.
◆ Improve the printability of paper.
◆ Improve paper quality and increase economic benefits.
Appearance: Colorless to brownish-yellow viscous liquid
Solid content: 20.0±1.0%
Solid content: 20.0±1.0%
pH: 2.0-5.0 (25℃)
Charge: Amphoteric
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Polyacrylamide, 20% aqueous dispersion
◆ Adding point: Machine chest is recommended.
◆ Applying dosage:10-30kg (as received) per ton of pulp (OD).Diluted uniformly is needed for 10-20 times by fresh water before adding. Do not use white water which will cause the loss of effect.
◆ Materials for tanks (storage and dilution) and pipework: Fiber reinforced plastics (FPR), polyvinyl chloride (PVC), polyethylene (PE) and 316 stainless steel can be used. Do not use iron so as to avoid corrosion and the product viscosity increasing problems.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Store in a dry and well ventilated warehouse with the temperature 5-35℃ and avoid freezing.
Shelf life is 3 months in sealed, container should be closed when not in use.
Packing: 1000kg/ IBC (1000L), tank truck.
◆ Significantly improve the internal-bonding strength, ring-crush compression resistance, stiffness, bursting, folding resistance, tensile strength, breaking length and other properties of paper.
◆ Increase retention of fines or mineral fillers.
◆ Improve paper quality and increase economic benefits.
Appearance: Colorless to light yellow viscous liquid
Solid content: 15.0±1.0%
Viscosity: 6000-12000mPa?s(25℃)
pH: 2.0-5.0 (25℃)
Density: 1.00-1.10 g/cm3
Charge: Amphoteric
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ Adding point: Machine chest is recommended.
◆ Applying dosage: 5-40kg (as received) per ton of pulp (OD).Diluted uniformly is needed for 8-12 times by fresh water before adding. Do not use white water which will cause the loss of effect.
◆ Materials for tanks (storage and dilution) and pipework: Fiber reinforced plastics (FPR), polyvinyl chloride (PVC), polyethylene (PE) and 316 stainless steel can be used. Do not use iron so as to avoid corrosion and the product viscosity increasing problems.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Store in a dry and well ventilated warehouse with the temperature 5-35℃ and avoid freezing.
Shelf life is 3 months in sealed, container should be closed when not in use.
Packing: 1000kg/ IBC (1000L), tank truck.
◆ Extremely high light fastness, anti-penetration efficiency and weather resistance, good chemical compatibility.
◆ High strength, and low usage.
◆ Enhances visual whiteness and improves paper/coating hue when used with FWAs.
Appearance：Bluish-black liquid
Solid Content：21.5-24.5%
Viscosity：< 250 mPa.s (25℃)
pH：5.0-9.0
Charge: Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ The pigments should be thoroughly mixed before use.
◆ To prevent flocculation, dilute in two steps (First step: pre-dilute at a ratio of 1:2 or 1:3; Second step: further dilute to the required ratio based on production needs). To avoid precipitation, use soft water or at least fresh water. Diluted product should be used up within 24 hours. The pigments that have been diluted also need to be thoroughly mixed before use.
◆ For pulp fiber whitening, the original liquid can be directly added.
◆ Do not mix with cationic products during dilution (to prevent precipitation).
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Stored in a cool ventilated dry warehouse with temperature of 5-30℃, and avoid freezing (which can cause excessive flocculation and affect performance) and direct high-temperature sunlight exposure.
Shelf life is 12 months in sealed, container should be closed when not in use.
Packing: 30kg/PE drum, 1000kg/ IBC (1000L).
◆ Extremely high light fastness, anti-penetration efficiency and weather resistance, good chemical compatibility.
◆ High strength, and low usage.
◆ Enhances visual whiteness and improves paper/coating hue when used with FWAs.
Appearance：Bluish-black liquid
Solid Content：50.0±1.0 %
Viscosity：< 300 mPa.s (25℃)
pH：6.0-10.0
Charge: Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ The pigments should be thoroughly mixed before use.
◆ To prevent flocculation, dilute in two steps (First step: pre-dilute at a ratio of 1:2 or 1:3; Second step: further dilute to the required ratio based on production needs). To avoid precipitation, use soft water or at least fresh water. Diluted product should be used up within 24 hours. The pigments that have been diluted also need to be thoroughly mixed before use.
◆ For pulp fiber whitening, the original liquid can be directly added.
◆ Do not mix with cationic products during dilution (to prevent precipitation).
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product
Stored in a cool ventilated dry warehouse with temperature of 5-30℃, and avoid freezing (which can cause excessive flocculation and affect performance) and direct high-temperature sunlight exposure.
Shelf life is 12 months in sealed, container should be closed when not in use.
Packing: 30kg/PE drum, 1000kg/ IBC (1000L).
◆ Chemically stable, does not react with other chemical additives.
◆ Does not contain acids, ammonia or free alkalis, does not damage the fabric, nor corrodes equipment.
◆ Penetrates deep into forming fabrics and felts to eliminate resin, waxes, fine fibers, fillers, and other plugging contaminants, restoring drainage performance.
Appearance：Light yellow liquid
Density：1.01
Flammability: Non-flammable
pH: 13.1
Boiling point: 95℃
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Mixture of emulsifiers, penetrants, dispersants, and anti-redeposition agents
This product can be used for cleaning both during machine shutdown and online operation.
Online Cleaning:
During paper machine operation, feed the undiluted product via a high-pressure pump through the machine’s multi-stage high-pressure water pump inlet, or deliver it via a plunger pump to the felt high-pressure shower system. The cleaner is then evenly sprayed onto the felt through this system in timed intervals using high-pressure water.
Recommendation: Perform one automated cleaning cycle daily with a spray duration of 4–6 hours per session, controlled by a timer switch.
Dosage Adjustment: The feed rate may be fine-tuned via the plunger pump based on stock cleanliness and felt water permeability, as needed.
Shutdown Cleaning:
① Prepare a 5% concentration solution of FC-30 by diluting it with water.
② Stop stock supply, shut off water for 5 minutes, then switch the paper machine to creep speed and release tension on the felt.
③ Evenly spray the prepared cleaning solution across the entire felt width. To ensure uniform absorption, spray duration should cover 3–5 full felt rotations (approximately 10–15 minutes).
④ After cleaning, maintain the felt at creep speed for 5–10 minutes, then rinse with water until no slippery residue remains on the felt.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Effective in both acidic and alkaline environments.
◆ Maintains efficient foam-breaking capability even after prolonged storage post-application.
◆ Excellent storage stability.
◆ Broad applicability across diverse systems.
Appearance：Milky white liquid
Solid Content：30.0±1.0 %
Viscosity：100-3000mPa.s (25℃)
pH：6.0-8.0（25℃）
pH：6.0-8.0（25℃）
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Alcohol ether compounds
◆ Applying dosage: 0.05-0.8%
◆ Suitable for defoaming in paper coatings and wet-end sections. The long-term efficacy of the defoamer depends on the formulation of the base material that needs defoaming. Different formulations should be tested for different base materials.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Significantly improve the internal-bonding strength, ring-crush compression resistance, bursting and other properties of paper.
◆ Improve drainage, increase machine speed
◆ Improve FPR, retention of fines or mineral fillers.
Appearance: Light yellow to amber clear liquid
Solid content: 12.0±1.0%
Viscosity: ≤200 mPa?s(25℃)
pH: 2.0-4.0 (25℃)
Density: 1.00-1.10 g/cm3
Charge: cationic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ Adding point: Machine chest is recommended, or added at the inlet of the fan pump, or added according to the specific situation of the paper machine.
◆ Applying dosage: 3-10 kg (as received) per ton of dry pulp. It should be uniformly diluted with fresh water not more than 10 times before adding.
◆ Gradually optimize after confirming that the drainage has been improved.
◆ The vacuum and headbox of the paper machine may need to be fine-tuned.
◆ Materials for tanks (storage and dilution) and pipework: Fiber reinforced plastics (FPR), polyvinyl chloride (PVC), polyethylene (PE) and 316 stainless steel can be used. Do not use iron so as to avoid corrosion and the product viscosity increasing problems.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool and dry warehouse to prevent freezing and high temperature, and the recommended storage temperature is 0-20℃ .
Shelf life is 45 days when stored at 0-25°C. Best used before expiration, container should be closed when not in use.
Packing: 1000kg/ IBC (1000L).
◆ Low organochlorine wet strength agent, water-soluble, cationic thermosetting resin, high cationic density, formaldehyde-free, low organochlorine content. It can be applied to tissue paper, food/pharmaceutical paper, decorative paper, etc.
◆ It can not only increase the wet strength of the paper, but also significantly improve the dry strength.
◆ Broken paper and waste paper are easy to recycle in neutral papermaking.
◆ It can also improve the retention of rosin size, neutral sizing agent AKD and filler in the papermaking process.
◆ It can give the paper more excellent performance at the same time.
Appearance: Colorless to brownish-red liquid
Odor: None
含固量：15.0±1.0%
Solid Content: 15.0±1.0%
Viscosity：≤150 mPa.s (25℃)
pH：2.0-6.0（25℃）
Dispersibility: Dispersible in water
Charge: Cationic
1.3-DCP and 3-MCPD: ＜120mg/kg
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Polyamide epichlorohydrin resin (PAE), 15% aqueous dispersion
◆ Applying dosage: 5-60kg per ton of paper according to the requirements of paper grade and wet-dry ratio, and can be used in combination with rosin size, neutral sizing agent AKD and aluminum sulfate.
◆ It should be diluted 5-10 times with clean water before use.
◆ Addition point: Close to the headbox to avoid excessive shear.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 3 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Improve FPR
◆Improve drainage, increase machine speed
◆ Improve uniformity and opacity
◆ Improve the printability of paper
◆ Reduce effluent load (COD, BOD, SS)
Appearance: Colorless to light brown, clear or slightly cloudy liquid
Solid Content：14.5±1.0%
pH ：10.0-12.0
Viscosity：≤150 mPa.s (25℃)
Density：1.05-1.15 g/cm3 (25℃)
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ Applying dosage: 2-6kg/ton as received.
◆ Addition point：Generally added after the pressure screen. Dilution before adding.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-30℃, and avoid freezing.
Shelf life is 3 months in sealed, container should be closed when not in use.
Packing: 1000kg/ IBC (1000L).
◆ Fast curing.
◆ Low dependence on aluminum sulfate, can be used alone in membrane transfer sizing machines.
◆ Surface strength improved.
Appearance: Light brown to dark brown liquid
Odor: None
Solid Content: 30.0±1.0%
Viscosity：＜50 mPa.s (25℃)
pH：2.0-4.0（25℃）
Dispersibility: Dispersible in water
Charge: Cationic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Styrene acrylate copolymer, 30% aqueous dispersion
◆ Applying dosage: 0.5-3.0 kg per ton of paper.
◆ Better performance occurring in conjunction with starch, the temperature of starch solution should be controlled at 50-80℃ for sizing.
◆ Avoided mixing with strong anionic substances.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ It can effectively combine the protein in starch with high protein content such as corn starch and wheat starch, prevent the protein precipitating from starch paste, thus improve the viscosity stability of starch paste, avoid production issues such as clogging screens, conveying pipes, and metering rods caused by starch paste.
Appearance: Colorless to yellow liquid
Density: 0.95-1.15 g/cm3 (25℃)
Viscosity: ≤100 mPa.s (25℃)
Viscosity: ≤100 mPa.s (25℃)
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ Applied as received.
◆ Applying dosage: 1.0-3.0% based on dry starch. Dosage varies depending on the protein content of starch, and the optimum dosage can be determined according to the conditions.
◆ Directly added to the corn starch slurry, that is, add it after water under stirring, in order to maximize the effect of the agent.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 1000kg/ IBC (1000L), or according to customer's requirement.
◆ Enhance the bonding strength of fibers.
◆ Increase the film-forming strength of starch.
◆ Improve adhesion to fine fibers and fillers.
◆ Reduce linting and dusting during printing.
Appearance：Colorless to yellow liquid
Odor：None
Solid Content：≥50.0%
Viscosity：≤2000mPa.s (25℃)
pH：5.0-8.0（25℃）
Dispersibility in water：Dispersible
Modified polymer, 50% aqueous dispersion
◆ Typical dosage: 4-8% based on dry starch.
◆ Added during the final stage of surface sizing preparation process.
Optimal dosage and adding points will be recommended by Technical Service based on the system to ensure optimal performance of your system.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Enhance the bond strength between starch and fiber.
◆ Improve the surface strength of paper.
◆ Minimize linting and dusting during printing process.
Appearance：Colorless to yellow liquid
Solid Content：40.0±2.0%
Viscosity：≤1500 mPa.s (25℃)
pH：6.0-9.5（25℃）
Dispensability in water: Dispersible
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Modified polymers
◆ Applying dosage: 3-10% (as received) based on dry starch.
◆ Added in the final process of surface sizing liquid preparation under dispersing.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 3 months in sealed, container should be closed when not in use.
Packing: 1000kg/ IBC (1000L).
◆ It helps hydrogen peroxide decompose evenly and effectively during the bleaching process, preventing fibers from severe damage.
◆ It exhibits excellent resistance to high temperatures, strong alkali, and oxidation.
◆ It does not form silica scale.
Appearance: Yellow to amber liquid
Solid Content：≥27.0%
pH ：6.0-9.0
Viscosity：≤200 mPa.s (25℃)
Density：1.10-1.30 g/cm3
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ Used as a hydrogen peroxide bleaching stabilizer for recycled pulp, deinked pulp, chemi-mechanical pulp, and chemical pulp, it replaces sodium silicate to reduce scaling and moderately decreases fiber damage during the bleaching process.
◆ Applying dosage: The typical dosage is 4-8 kg (as received) per ton of oven-dried pulp. The specific addition amount should be adjusted according to actual bleaching performance.
◆ Recommended to use the product as received or diluted 1:1 to 1:2 (with deionized water).
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/ IBC (1000L).
◆ Reduces stickies deposition, decreases web break frequency, improves paper machine runnability, and extends fabric/felt service life;
◆ Significantly lowers the number of holes and dark spots caused by stickies in finished paper, increasing premium-grade yield.
◆ Reduces consumption of wet-end chemicals (e.g., retention/drainage aids, fabric cleaner, dryer stripping agents).
◆ Cleans the paper machine system?, minimizing anionic trash in the system.
Appearance： Light yellow liquid
Density：1.00-1.25 g/cm3 (20℃)
pH：4.0-7.0（25℃）
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS).
Composite enzyme preparation
◆ Recommended dosage?: 50-150g/t (oven-dried pulp);
◆ Operating pH?: 6.5-9.5; temperature：25-65℃; pulp concentration: 3.5-15%; residence time of reaction: 1-2 hours.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cold (4℃ is recommended), dry warehouse，avoiding direct sunlight.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 1000kg/ IBC (1000L).
◆ mprove deinking efficiency, increase pulp whiteness, it is very effective especially for floatation deinking of MOW.
◆ Increase pulp yield and improve physical characteristics of recycled pulp.
◆ Decrease BOD and COD of waste water (COD content in waste water by enzymatic deinking is half of that by chemical deinking method), and greatly decline the chemical usage for deinking and waste water treatment
◆ Cut down the final cost of deinking.
Appearance: Light brown liquid or light brown powder
pH ：6.0-9.0
Density：0.90-1.50 g/cm3
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
◆ Deinking process: Pulper → add water → start dynamo → adjust pH value → add deinking enzyme product→ put waste paper → pulping and deinking (15-30 min) → floatation → bleaching → discharging
◆ Dosage
Pulp: 10%-18%
Dosage: 100-300g/t (based on oven dry of waste paper);
pH value: 6.0-9.0
Temperature：30-60 ℃
Time: 15-30 min
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cold, dry warehouse，avoiding direct sunlight.
Powder Product: Shelf life is 12 months.
Liquid product: Stored in cold room (4℃-10℃), shelf life is 12 months. Stored at room temperature, shelf life is 6 months.
Packing: 20kg, 200kg/drum, 1000kg/ IBC (1000L).
